8 mold prevention tips from your local SERVPRO

Visits: 138

With heavy snow comes water, and with excess water, comes mold and mildew. If you own a home, you may want to take these mold prevention tips in to consideration.

Here are 8 mold prevention tips from the experts at  SERVPRO of Forest Hills / Kew Gardens. SERVPRO specializes in the cleanup and restoration of residential and commercial property after water damage, and in removing mold and mildew from your home or business.

“The best approach is preventing mold before it becomes a problem. The key to mold prevention is moisture control,” said owner, Eddie Lopez, a resident of Forest Hills.


Here are 8 ways to curb moisture indoors, and the mold that thrives on it.


mold-in-jackosnville-house-624x4681. Identify problem areas in your home and correct them. You can’t mold-proof your home, but you can make it mold-resistant. Do an audit of your home: where are the problem areas? Does the basement flood? Do you notice frequent condensation on an upstairs window? Is there a water stain on the ceiling from a persistent leak?

2. Dry wet areas immediately. Mold can’t grow without moisture, so tackle wet areas right away. Seepage into the basement after a heavy rainfall, accumulation from a leaky pipe, even a spill on the carpet should be dried within 24 to 48 hours.

3. Prevent moisture with proper ventilation. It may be that your routine domestic activities are encouraging the growth of mold in your home. Make sure an activity as simple as cooking dinner, taking a shower, or doing a load of laundry doesn’t invite mold by providing proper ventilation in your bathroom, kitchen, laundry room, and any other high-moisture area.

4. Equip your home with mold-resistant products. Building a new home or renovating an old one? Use mold-resistant products like mold-resistant drywall or mold-resistant Sheetrock, and mold inhibitors for paints.  

5. Monitor humidity indoors. The EPA recommends keeping indoor humidity between 30 and 60 percent. You can measure humidity with a moisture meter purchased from your local hardware store. You’ll also be able to detect high humidity by simply paying attention to potential problem areas in your home.

6. Direct water away from your home. If the ground around your home isn’t sufficiently sloped away from the foundation, water may collect there and seep into your crawlspace or basement.

7. Clean or repair roof gutters. A mold problem might be a simple matter of a roof that is leaking because of full or damaged gutters. Have your roof gutters cleaned regularly and inspected for damage. Repair them as necessary, and keep an eye out for water stains after storms that may indicate a leak.

8. Improve air flow in your home. According to the EPA, as temperatures drop, the air is able to hold less moisture. Without good air flow in your home, that excess moisture may appear on your walls, windows and floors. To increase circulation, open doors between rooms, move furniture away from walls, and open doors to closets that may be colder than the rooms they’re in. Let fresh air in to reduce moisture and keep mold at bay.

Screen Shot 2017-10-19 at 5.22.33 PM

SERVPRO of Forest Hills / Kew Gardens covers Forest Hills, Middle Village, Glendale, Maspeth, Ridgewood, Woodhaven, and surrounding areas of Queens.

You can reach SERVPRO of Forest Hills-Kew Gardens at 718.381.3702. Emergency service available.

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *

Follow by Email